A very large range of tool holders and boring bar holders (standard VDI / DIN and special manufacturing as per drawings) of many different sizes
Tool holders with prismatic "dovetail" lock VDI 3425 norms (prism width from 56 to 140 mm.).
On request, if technically possible, tool holders are made with the inner passage of coolant and the outlet with orientables spheres.
The RIGHT or LEFT version, about some kind (not all) of tool holders and boring bar holders, depends only from the position of the stud (pivot) "D" in the prism (see CATALOGUE) : if you insert it in one hole, it becomes right version, if you insert it in the other hole, it becomes left version.
If you are not sure about the right or left kind of tool holder to buy, some items can be manufactured with both the holes (right and left), so you can put by yourself (with a little press, or a little hammer, but always carefully) the stud (pivot) where you want.
This kind of tool holder (or boring bar holder) is named "DOUBLE P.S." (price is always the same).
At the delivery, in the package you'll find the tool holder (or the boring bar holder) with two holes in the prism side, and its stud (pivot) separately, to obtain the item that you really need.
The items that can be manufactured in this way are only the ones that are find in our lists with the name "DOUBLE P.S.", for the others it is not possible.
VERY IMPORTANT : Some NC lathes manufacturers can mount the turret out-of-axis of some mm. and consequently the tool size increases, so we can have lathes with :
- 4 mm. out-of-axis turrets that mount 56 mm. prismatic "dovetail" toolholders and work with a 20 mm. tool size, instead the standard one of 16 mm.
- 5 mm. out-of-axis turrets that mount 72 mm. prismatic "dovetail" toolholders and work with a 25 mm. tool size, instead the standard one of 20 mm.
Tool holders to use are the same, but standard boring bar holders cannot be used.
With these lates you must use the boring bar holders " GR " type, manufactured with out-of-axis prismatic lock.
" GR " type boring bar holders are only for these items :
* 56 mm. prismatic lock :
- MC 1.6 GR
- MC 1.7 GR
- MC 1.8 GR
- MC 1.08 GR
- MC 1.9 GR
- MC 1.09 GR
- MC 1.10 GR
- MC 1.010 GR
- MC 1.12 L80 GR
- MC 1.12 L114 GR
* 72 mm. prismatic lock :
- MC 2.6 GR
- MC 2.7 GR
- MC 2.8 GR
- MC 2.08 GR
- MC 2.9 GR
- MC 2.09 GR
- MC 2.10 GR
- MC 2.010 GR
- MC 2.12 L90 GR
- MC 2.12 L120 GR
- Only for 5 mm. out-of-axis lathes with 72 mm. prismatic lock, we manufacture a special version of the rapid change tool holder, MC 3.15 S and MC 3.015 S, with 72 mm. dovetail and the body more large (please look at CATALOGUE section).
In the CATALOGUE section you'll find only standard boring bar holders; " GR " types have the same sizes and price, only prismatic lock is out-of-axis.
In your inquiries and order WRITE ALWAYS THE KIND OF LATHE, THE TURRET AND THE TOOL SIZE YOU USE.
|Tool holders with cylindrical shaft serration DIN 69880 norms (shaft diameter from 20 to 80 mm.), with inner passage of coolant with orientables holed spheres, permitting to direct the refrigerating fluid on the cutting tool.|
Tool holders for the most common numerically controlled lathes.
Tool holders with special dimensions made according to customers exigences.
Out of true axes tool holders for the satisfation of every production requirement.
All our tool holders are made in thermically treated steel and burnished
for tool discs or turrets with other locking systems